Cisco : IOS Upgrade to Denali

CATALYST IOS UPGRADE TO DENALI

You can copy the files to the router from your local pc with the Fenix web server.

Right click on the file in the Fenix web browser > copy link > use the copy command on the device.

Copy OS file to flash:

Copy usbflash0:<filename> flash:<filename>

                  verify /md5 bootflash:<image_file>

On XE 3.x

software install file flash:<filename> new force

On Denali 16.x

request platform software package install switch all file flash: <filename> auto-copy

Troubleshooting

Clean OS’s in Denali

Request platform software package clean switch all file flash:

If Versions are Mismatches in XE

% Switch # is running incompatible software.

Compatible software must be installed on this switch before performing the current operation.

Switch#software auto-upgrade

If Versions are Mismatches in Denali

device(config)#software auto-upgrade enable

UPGRADE 3.6+ IF MASTER SWITCH IS ON DENALI 16.3

request platform software package install autoupgrade

Leave a Reply

Your email address will not be published. Required fields are marked *