Cisco/Brocade : Basic Similar Commands

  • Here are some basic switch commands and the Cisco to Brocade differences, even though the OS’s are similar they have some subtle differences.

Task

Cisco

Brocade

Configure a VLAN

Interface vlan 2

Vlan 2

Configure a trunk port

Int fa0/1

Switchport trunk encap dot1q

Switchport mode trunk

Vlan 2

Tagged eth 0/1/1

Vlan 3

Tagged eth 0/1/1

Vlan 4

Tagged eth 0/1/1

Interface ethernet 0/1/1

Dual-mode 1

Configure a access port

Int fa0/1

Switchport access vlan 2

Vlan 2

Untagged eth 0/0/1

Configure an IP address on a VLAN

Int vlan2

Ip address 192.168.1.1 255.255.255.0

Vlan 2

Router interface ve 1

Interface ve1

Ip address 192.168.1.1 255.255.255.0

Configure a range of ports

Int range fa0/1-10

Int eth 0/1/1 to 0/1/5

Configure a port for both voice and data vlans

Int fa0/1

Switchport access vlan2

Switchport voice vlan3

vlan2

Tagged eth 0/1/1

vlan3

Tagged eth 0/1/1

Inter eth 0/1/1

Dual-mode 1

Voice-vlan 3

Inline power

Show the interface status of a port/vlan

Sh int fa0/1

Show int eth 0/1/1

See CDP Neighbors

Show cdp neighbors

Show fdp neighbors